6
Seebacher GmbH
www.seebacher.de
Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz
Fax: +49 (0) 80 41 / 77 77 2
10.2. Address setting
Due to its design, the sensor does not provide space for the usual DIP switch for address setting. At this sensor, the address is set via software
parameterisation with the ISYGLT ProgramDesigner.
Connector
Designation
+
Operating voltage
-
Operating voltage
A
Subnet BUS A
B
Subnet BUS B
10.1. Pin assignment
Operating voltage
12-24V DC (max. 30V DC)
Current consumption
max. 10mA
Subnet (RS-485)
max. 5.6V limitation by Z-diodes
Measuring range
illuminance
0 to 4500 lx (depending on mounting)
Connection
Mini-plug Molex 51021-0400, 4-pole cable to RJ10 incl. terminal adapter
Delivery scope
Sensor, 250mm connection cable, RJ10 adapter für cable cross-section 0.25-0.75mm²
Operating temperature ta
-20°C to +45°C
Storage temperature
-25°C to +70°C
Humidity
0-90% r. h. non-condensing
Protection class
>IP20
CE mark
Yes
10.3. Function displays
State
Meaning / Function
LED red
slow flashing
Sensor has no address
fast flashing
Sensor is in programming mode
Off
Sensor has a BUS address
individual
In BUS operation, the LED is freely programmable, e.g. motion active.
Button right
Activating the programming mode, actuation with a small screwdriver or plastic, e.g. small cable tie
Button left
Deactivating the programming mode
