background image

2

Seebacher GmbH 

www.seebacher.de 

Phone: +49 (0) 80 41 / 77 77 6

Marktstrasse 57, 83646 Bad Tölz 

[email protected] 

Fax: +49 (0) 80 41 / 77 77 2

1. Notes on documentation

These  instructions  are  intended  for  qualified  personnel  who  are 
familiar with the assembly, installation and operation of the ISYGLT 
system.  It  is  essential  that  you  read  these  operating  instructions 
through before commissioning and keep them accessible for further 
use.
SEEBACHER cannot accept any liability for damage or malfunctions 
resulting from failure to observe these instructions.

1.1. Retention of documents

These instructions and all other applicable documents are part 
of the product. They must be handed over to the device operator. 
The operator will store the documents so that they can be made 
available if necessary.

1.2. Symbols used

Observe the following safety and other instructions in the manual:

  Handling instruction

The hand indicates that you should carry out an act.

  Danger!

Immediate danger to life!

  Attention!

General notes, useful information and special features

Directory of Content

1. Notes on documentation

1.1. Retention of documents

1.2. Symbols used

2. Safety instructions

2.1. Intended usage

2.2. Predictable mishandling

2.3. Safe handling

2.4. Qualification of staff

2.5. Changes to the product

2.6. Use of spare parts and additional equipment

2.7. Liability notes

3. Warranty

4. Declaration of Conformity

5. Service address

6. Maintenance / Care / Disposal

7. Storage

8. Assembly

9. Product description

10. Technical Data

10.1. Pin assignment

11. Wiring diagram

Содержание IN-08T








Отзывы: