Isuzu NOVOCITI, Руководство пользователя, Страница: 70 / 89

66
POWER STEERING OIL
Power steering oil should be replaced according to the maintenance schedule.
Checking the Hydraulic Steering Wheel Oil Level
Oil level in hydraulic oil container must be between the “MAX” and “Min” lines. If the level
of the “MIN” line is below then add more oil until the “MAX” line.
The hydraulic oil container is located in the rear of the engine compartment on the right.
After checking the oil level and the cover the tap securely.

Before adding oil, clean the area around the tap and the muslin bag or
from a clean water bowl.

Recommended hydraulic steering wheel oil should not be mixed with oils
of other brands. Due to chemical reactions, a mixture of different branded
oils may cause malfunction to the system.
Replacing Power Steering Fluid
Discharging
1. Apply the parking brake and chock the rear wheels in place.
2. Insert the upper portion of the Jack, the jacking point (removal) firmly.
3. Lift up the front wheels until the vehicle is completely lifted from the ground.
4. Hydraulic oil hose between oil pump and oil next to the container at the same time, the
steering units and hydraulic oil remove the oil pipe between the container pour oil and power
steering.
5. Power steering fluid is completely empty when the remaining oil in the piping is to remove
the steering wheel left and right a few times to end the turn.
Refilling
1. Securely reinstall the oil pump and the oil hydraulic oil power to steering fluid with the
hose and then fill the container again.
2. After filling the container with oil up to specified oil level hydraulic oil level to stoop low
and wait around 2 to 3 minutes.
3. Without the starting the engine, turn the steering wheel in either direction several times.
4. Land the vehicle and start the engine. When running the engine at idle, turn the steering
wheel fully both ways a few times. If you hear abnormal noises when turning the steering
wheel, power steering, it means that air remains in the system.