Isuzu NOVOCITI Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 89

Isuzu NOVOCITI Скачать руководство пользователя страница 63

59

2. Automatic renewal DPD warning light and a manual DPD renewal warning light should
be illuminated sequentially.

3. Manual refresh auto refresh DPD within 30 seconds the warning light should turn off and
the warning light.

4.

Turn the ignition key to “OFF” (CLOSED) position and leave in this position for 15

seconds.

DRUM BRAKES

Brake shoe linings are available in the case of the limit of wear on; braking performance is
reduced; the brake components may lead to malfunction.

Do not ride with worn out brake shoe pads over the limit.

Brake Shoe Pads

To be checked against the brake shoe linings to wear out

1. Remove the rubber plug from the hole to support

plate for the control.

2. Check whether there is sufficient thickness of brake

shoe linings. Also, the side surfaces of the pads,
cracks, or other damage inspect for spalling.

3. The brake shoe linings wear limit of 1 mm thickness

is  pasted.        When  the  limit  value  falls  below  1  the
pads  wear  out  and,  the  shoe  is  worn  from  time  to
time. The brake lining wear surface cracks or flaking
or  if  you  have  side  abrasions  above  the  limit,  they
should  be  changed.    The  change  process  must  be
made in the closest Isuzu service.

«
...
61
62
63
64
65
...
»

Содержание NOVOCITI


























































































Отзывы:

Нет отзывов