21
CARE AND MAINTENANCE
C
LEANING THE OUTSIDE PARTS
Use a soft, damp cloth to wipe the external surface of the air sterilizer.
To ensure a good performance of the sterilizer over time it is recommended to
carry out annual maintenance in the specialized service center. If the air
sterilizer requires maintenance, disconnect the appliance from the mains and
contact your local ISTOK BREEZE dealer.
IMPORTANT NOTE! All maintenance and repair operations must be
performed only by qualified and specially trained personnel
.
R
EPLACING THE PRE
-
FILTER
IMPORTANT NOTE! Replacement must be performed only by qualified and
specially trained personnel.
1. The sterilizer
ISTOK BREEZE 60/120
is supplied with 11 spare dust filters.
The performance of the sterilizer depends on the timely dust filter
replacement. The dust filter at the bottom of the air sterilizer should be
checked monthly and cleaned or replaced when it becomes clogged with dust.
This maintenance operation is performed by the user
IMPORTANT NOTE! Always unplug the sterilizer from the mains before
changing the dust filter!
To replace the filter:
1. Switch off the sterilizer and disconnect it from the mains power.
2. Unclip the lower grill (1), which is fixed with the magnet, pulling it
downwards.
3. Take the grill out from the grooves and remove the dust filter.
4. Place a new filter.
5. Reverse the above procedures to reassemble.
