BUY-TIME MODE PAYMENT SYSTEM
BUY-TIME MODE PAYMENT SYSTEM
In Buy-time mode payment systems, each button corresponds to a wash program. The display shows the time
available for the service when either coins or code (Codax system) is inserted.
COIN PAYMENT SYSTEM
1
INSERT COINS
1) Insert the coins or tokens in the coin acceptor slot. The display shows
the amount of time available and the credit entered.
•
The system is not designed to return unused coins or tokens. It does
however have a device that rejects coins when it detects a fault or a
power failure.
•
If no program has been activated within 30 seconds, the time available
will start counting down and the message "PRESS A PROGRAM
NOW" will be displayed.
2
SELECT WASH PROGRAM
1) Take the gun or lance out of holder.
2) Press the corresponding program number using the program selection
buttons; the wash bay will start working.
•
During the wash, the display shows the program in progress and the
time remaining for the wash.
•
If more coins are inserted during the service, the wash time is
increased.
3) Change the program by pressing the corresponding program button
again.
•
The display shows a warning when the time left is 10 seconds.
4)
When the wash is finished, leave the gun or the lance in their
corresponding holders.
3
STOP WASH
1) To stop the washing process, press STOP once.
•
When STOP is pressed, the wash stops but the time continues to
count down.
2) To resume the wash, press the button for the program you wish to
activate again. The message ‘TO CONTINUE, PRESS ANY BUTTON’
will be shown on the display.
•
The wash will continue until the time remaining runs out.
14
