- 66 -
3.8.3 Reset to default
“Reset to default”
allows user to reset controller to the factory default setting.
Figure 3.8.3.1
Reset to default value, the password is:
1234
, and IP address to default
DHCP.
Default IP address:
192.168.10.50
(DHCP)
Default subnet mask:
255.255.255.0
Default gateway:
192.168.10.254
3.8.4 Config import & export
“Config import & export”
allows user to save system configuration values:
export, and apply all configuration: import. For the volume configuration
setting, the values are available in export and not available in import which
can avoid confliction/date-deleting between two controllers. That says if one
controller already exists valuable data in the disks and user may forget to
overwrite it. Use import could return to original configuration. If the volume
setting was also imported, user’s current data will be overwritten.
Figure 3.8.4.1
1.
Import:
Import all system configurations excluding volume config.
2.
Import Logical unit only:
No system nor volume configurations,
import LUN configurations only.
3.
Export:
Export all configurations to a file.
