- 92 -
9. Select the second “Source IP” and “Target Portal” to iSCSI data port
2. Then click
“OK”
.
10. iSCSI device is connected. Click
“Details”
.
11. Click
“Device”
tab, then click
“Advanced”
.
12. Click
“MPIO”
tab, select
“Load Balance Policy”
to
“Round
Robin”
.
13. Click
“Apply”
.
14. Run
“Device Manage”
in Windows. Make sure MPIO device is
available.
15. Done.
The MC/S setup instructions are in the following:
1. Create VG/UDV, and then attach LUN.
2. Add the first “Target Portal” on Microsoft iSCSI initiator, For MC/S,
there is only ONE
“Target Portals”
in the
“Discovery”
tab.
3. Logon.
4. Then click
“Advanced…”
.
5. Select the first “Source IP” and “Target Portal” to iSCSI data port 1.
Then click
“OK”
.
6. After connected, click
“Details”
, then in the
“Session”
tab, click
“Connections”
.
7. Choose
“Round Robin”
in
“Load Balance Policy”
.
8.
“Add”
Source Portal for the iSCSI data port 2.
9. Select the second “Source IP” and “Target Portal” to iSCSI data port
2. Then select
“OK”
.
10. Done.
System information
iAge820-iSCSI/ mAge208U20-iSCSI/ mAge316U20-iSCSI
SW version
2.3.1
