Innovative Scientific Solutions, Inc.
or 9KB MTU. Once the computer has been properly configured for the camera, open the
software from the desktop icon to display the GUI.
The network interface card on the computer can be set to either obtain an IP address
automatically from the camera or with a static IP that corresponds to the camera IP address.
When the camera is configured and connected, the IP on the PC will be reset by the software to
match the IP settings of the camera. These settings can be changed to reflect the user
requirements on the PC. To change the IP settings on the computer, navigate to the Local Area
Network connections page on the computer. Select the network connection where the camera is
connected by right-clicking and selecting ‘
Properties
.’
This will open up the Local Area Connection Properties window. From here, select the Internet
Protocol Version 4 (TCP/IPv4) (above left) to open the properties window (above right) for the
IP settings. The IP address can be set to a static IP here to communicate via Ethernet with many
devices. The only fields that need to be filled in are the IP address and the Subnet Mask. The IP
address can be set to user specification. The Subnet Mask should be set to 255.255.255.0.
8
