Innovative Scientific Solutions, Inc.
Once installation is complete, reboot the computer.
Setting up the NIC
To get the fastest performance from the camera,
use a Cat6 Ethernet cable and a computer with a
Gigabit Ethernet Network Interface Card (NIC).
Gigabit Ethernet has a maximum data transfer
rate of 1 gigabit per second while fast Ethernet
(FE) is limited to 100 megabits per second.
Using a computer with a GigE NIC will enable
the camera to collect data at its maximum frame
rate of 35/44 (normal/overclocked) frames per
second. All other Gigabit Ethernet devices
should be disconnected from the computer and
disabled from the network while using the PSP-
CCD. To increase the frame rate capability on
the computer and use the full bandwidth of the
NIC, Jumbo frames should be enabled and the
value should be set to the maximum for the
computer. The maximum values are either 7KB
7
