6
Manual No. 7018081-02, Rel. Jun. 1999
REMOVAL and INSTALLATION
© Copyright Isringhausen 1999
MODEL 6800/338 BUS
MODEL 6800/338 PREMIUM LX
Armrest
Set up
• Vehicle must be in a safe parked
position or seat removed from
vehicle.
Removal
• Remove fasteners
• Remove armrest
Installation
• Fasten armrest to seat with screws
and lockwashers.
• Torque screws to 14.8 - 18.4 lb ft (20
- 25 N•m)
Backrest
Set up
• Vehicle must be in a safe parked
position or seat removed from
vehicle.
Removal
• Mark and disconnect air lines
• Remove fasteners
• Pry one side of seat frame away from
backrest
• Remove backrest
Installation
• Put one side of backrest in place
• Pry other side of seat frame away
and put backrest in place
• Fasten backrest to seat frame with
shoulder bolts
• Torque shoulder bolts to 22 - 25.5 lb
ft (30 - 35 N•m)
• Connect air lines
CAUTION
Avoid the risk of injury. Vehicle must be in a safe parked position before working on the seat.
NOTICE
To remove seat from vehicle follow vehicle manufacturer's instructions.
