background image

CAUTION

Avoid the risk of injury.

Vehicle must be in a safe parked

position before inspecting seat.

Visually inspect the seat.  Look for damaged or worn upholstery and parts. The seat should be clean and free
of dirt and debris.  Check all the seat functions they should work properly and be in good condition.

1. Adjustable armrest

Should move up freely, the adjustment knob should be easy to turn and
the armrest must stay in the adjusted position.

2. Backrest adjustment

The control should be easy to release then the backrest should
move freely. The backrest must stay in the adjusted position.

3. Backrest side bolster

The control should be easy to move to the inflate or deflate
position and must return to neutral when released.  Each side
support should inflate and deflate evenly and stay at the
adjusted firmness..

4. Height adjustment

Control should be easy to move and hold the seat in the
adjusted position when released.

5. Horizontal adjustment

Control should be easy to move and hold the seat in the
adjusted position when released.

6. Seat tilt adjustment

Control should be easy to move and hold the seat in
position when released.

7. Lower and upper lumbar support

The controls should be easy to move to the inflate or
deflate position and must return to neutral when
released.  Each lumbar support must stay at the
adjusted firmness.

8. Cushion length adjustment

Control should be easy to move and hold the seat
cushion in the adjusted position when released.

9. Adjustable shock absorber

Control should be easy to move and stay in position when
released.

10. Quick air release

Control should be easy to move and hold seat  in the adjusted position when released.

11. Horizontal isolator

Control should be easy to move and stay in position when released.

12. Headrest

Should be easy to move up and down and stay in position.  Headrest should tilt forward and backward freely.

If the seat is not functioning properly take it out of service until it can be repaired.

4

Manual No. 7018081-02, Rel. Jun. 1999

INSPECTION

© Copyright Isringhausen 1999

MODEL 6800/338 BUS

MODEL 6800/338 PREMIUM LX

1

2

9

10

11

8

6

4

7

5

3

3

12

2

Содержание 6800/338 Bus























Отзывы: