11
PARTS OF THE HOUSING
The housing front accomodates the camera. All camera controls are
external and are laser-engraved with the symbols for the camera functions.
To better understand the functioning of all controls we invite to read the
camera’s manual carefully.
On the window sides (or central) there are two threaded holes where
one or two external strobes can be connected by optical fiber using the
adaptor included.
The bottom of the housing features 3 different threaded holes:
two M6
holes located on the sides and one central one of ¼ W.
In this way it is possible to use different accessories such as brackets for
strobes or tripods.
Internally, the camera can be inserted through the two integrated guides
and it will remain steady thanks to the 4 internal plastic supports that
block the camera when the housing is closed.
The back door features all key/main camera controls by means of clearly
labelled laser-engraved longlasting buttons. It is fundamental to apply
the necessary care when handling it.
In the center there is a large window for a fine camera display view.
Above the window of the back door there is a leaking
acoustic LED alarm
.
This component acts as an alarm in case of moisture inside the housing.
An internal sensor will turn on the
LED red
: in the event that this happens
consult the section
TROUBLESHOOTING (p.28).
Both
LED
and audible sensor are powered by an internal battery that is
replaceable by the user.
The back of the housing is entirely detached from the front body to
make easier the camera fitting. To separate the Back from the housing is
necessary to first disable the safety.
FRONT
BACK
