12
All camera controls are external and are laser-engraved with the symbols for the camera
functions.
Please refer to the Identification of Parts Manual to see all controls of the housing.
All key
Nikon D610 camera
controls can be accessed.
The front ends with the port/lens mount hole that allows to mount different ports.
Removable port -B120mm bayonet.
On top of the housing there are 2 fiber optic connectors and/ or (optional) 2 electrical
sync cord bulkheads.
Two M16 hole
for installation of accessories, e.g. vacuum valves or
monitors is also available.
Above, the single-hand closing knob for closing/opening the housing and detach the
back completely.
M8 hole
located on upper side of the housing for various accessories
such as focus lights, etc.
On both sides you can find ergonomic side handles, adjustable (via optional accessory).
Wide, rubber covered feet on the bottom for solid footing.
Two M6 holes
located on the bottom of the housing front side can be used for different
accessories such as brackets for strobes or tripods.
An easy and quick release camera mounting plate allows the camera positioning and
a lever locks the tray inside the housing. The tray is made of plastic material and is
provided with a not removable screw to fix it on the housing.
A lever lock on the tray secures the camera when inserted. Insert the camera through
the two integrated guides of the plate support. Slide the lever to the right to lock the
camera on the plate; to release it slide it to the left.
On the upper side the
hotshoe
should be to connected to the hotshoe of the camera.
A special internal slot located on the right top of the housing interior allows you to lock
the hotshoe when not in use.
Dual high-quality O-Ring
seals on every movable part protect and ensure a perfect
and secure watertight.
PARTS OF THE HOUSING
FRONT
INTERIOR
