Isotech TTI-7-R, Руководство оператора

Страница: 99 / 120

Communications Interface
7.12 DATAIogger Command Group
This group of commands stores and retrieves measurement values
using the data logging memory. This memory is non-volatile and can
store up to 4000 readings.
7.12.1 Datalogger command summary
Command Description
DATAIogger:MODE Sets the data logger mode.
DATAIogger:MODE? Queries the data logger mode.
DATAIogger:CLEAr Clears the data logger memory.
DATAIogger:STARt Start logging readings to data log memory.
DATAIogger:STOP Stop logging readings to data log memory.
DATAIogger:STEP Single step logging readings to data log memory.
DATAIogger:VALUe?
Request a specified number of readings from data log
memory.
DATAIogger:POINts? Queries the number of readings stored in the data log memory.
7.12.2 Datalogger commands
DATAIogger:MODE {mode}
Turns data logging to memory on or off.
{mode} 1, on Data logger on
0, off Data logger off
Terminates the current measurement cycle.
Sets the Run/Hold trigger mode to Hold.
Sets the logging to memory mode as specified by the command.
Re-sets the scanner routine if the scanner mode is On.
DATAIogger:MODE?
Query the state of the data logger mode setting.
Returns "ON" Data logger on
"OFF" Data logger off
DATAIogger:CLEAr
Clears the data logger memory.
CAUTION: All the current stored data will be lost!
Terminates the current measurement cycle.
Clears the data logger memory.
Re-sets the sample and data logger counter.
Re-sets the scanner routine if the scanner mode is On.
Page 7-31