manualshive.com logo in svg

Isotech TTI-7-R, Руководство оператора

Поделиться
Скачать
Isotech TTI-7-R Скачать руководство пользователя страница 74

Options and accessories 

 

7.3.5 RS-232 Interface Commands 

SYSTem:REMote

 

Place the TTI-7-R in the remote mode for RS-232 operation. The 
REM legend on the display indicates that the instrument is under 
control of the remote interface. The front panel keys will be locked 
out.

 

SYSTem:LOCal

 

Return the instrument to the Local mode from RS-232 operation. All 
keys on the front panel are fully functional. This is the default at 
power-up.

 

7.4    Programming the Interface 

7.4.1   Introduction

 

All interfaces are programmed in a common language which is 
based on SCPI (Standard Commands for Programmable 
Instruments). Although similar in style, full conformance to the SCPI 
and IEEE488.2 standards is not guarantied. The following sections 
provide a guide to the structure and syntax of the programming 
language.

 

 

                                                                                                                  Page 

7-6

 

 

Содержание TTI-7-R

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды