Page 9 of 12
TTI-10 Iss.02 – 07/11
Channel Activation / [Chnl]
To activate or deactivate a measuring channel push [ENTER/MENU]. Use the up and down keys [
] to select
Chnl
. Push again [ENTER/MENU]. On the left corner of the display appears a small
1
, which indicates the selected
channel. To change the channel use the up and down keys [
]. Push [ENTER/MENU] to confirm. Use the up and
down keys [
] again to activate
on
or deactivate
off
the requested measuring channel and push [ENTER/MENU] to
confirm. Push [ESC] to revert back to the measuring mode.
Note:
As a minimum one channel is active!
MENU
Unit Lin2
CAL
*
Chnl Log
*
The calibration is hidden when the instrument has been calibrated at Isotech, see page 6 for details.
Memory Setup/Lo6
The TTI-10 can log up to 4000 measurements in memory and report the maximum, minimum and average values of
the logged data.
Push [ENTER/MENU] and use the up and down keys [
] to select
Lo6
. Push [ENTER/MENU] to confirm. Use the
up and down keys [
] again to start
[on]
or Stop
[off]
the logger. Push [ENTER/MENU] to confirm. Use the up
and down keys [
] again to select between automatic storage
[Auto]
or manually operated storage
[SPot]
. Push
[ENTER/MENU] to confirm]. Use the up and down keys [
] again to select between to add on data
[Add]
and
creating a new file
[nLo6]
. Push [ENTER/MENU] to confirm]. By selected automatic storage at the end you have to
select the time interval:
1 S 1 second
5 S 5 seconds
10 S 10 seconds
20 S 20 seconds
30 S 30 seconds
1 M 1 minute
2 M 2 minutes
5 M 5 minutes
10 M 10 minutes
20 M 20 minutes
By selected manually operated storage you are able to save the measurement by pressing ESC by each time.
Push [ENTER/MENU] to confirm. Push [ESC] to revert back to the measuring mode.
MENU
Unit Lin2
CAL
*
Chnl Log
*
The calibration is hidden when the instrument has been calibrated at Isotech, see page 6 for details.
E.g. of the instrument’s LCD by activated logging mode:
On the bottom you can see the percentage of the occupied memory (0..99%). If a
calibration option is activated the display is alternating between displaying memory status
and calibration information.
