Isotech MEDUSA 510 Series Скачать руководство пользователя

Страница: 4 / 41

Page 4 of 41

Medusa 510/511 Series Iss.12 – 08/13

GUARANTEE

This instrument has been manufactured to exacting standards and is guaranteed for twelve months against electrical

break-down or mechanical failure caused through defective material or workmanship, provided the failure is not the

result of misuse. In the event of failure covered by this guarantee, the instrument must be returned, carriage paid, to

the supplier for examination and will be replaced or repaired at our option.

FRAGILE CERAMIC AND/OR GLASS PARTS ARE NOT COVERED BY THIS GUARANTEE

INTERFERENCE WITH OR FAILURE TO PROPERLY MAINTAIN THIS INSTRUMENT MAY INVALIDATE THIS

GUARANTEE

RECOMMENDATION

The life of your

ISOTECH

Instrument will be prolonged if regular maintenance and cleaning to remove general dust

and debris is carried out.

We recommend that this instrument to be re-calibrated annually.

ISOTHERMAL TECHNOLOGY LTD.

PINE GROVE, SOUTHPORT

PR9 9AG, ENGLAND

TEL: +44 (0) 1704 543830/544611
FAX: +44 (0)1704) 544799

The company is always willing to give technical advice and assistance where appropriate. Equally, because of the

programme of continual development and improvement we reserve the right to amend or alter characteristics and

design without prior notice. This publication is for information only.

Содержание MEDUSA 510 Series










































Результаты поиска

Содержание MEDUSA 510 Series

Отзывы:

Похожие инструкции для MEDUSA 510 Series

Бренды по названию

Популярные бренды

Isotech MEDUSA 510 Series, Руководство по эксплуатации пользователя

Результаты поиска

Содержание MEDUSA 510 Series

Отзывы:

Похожие инструкции для MEDUSA 510 Series

Бренды по названию

Популярные бренды