Isoplam L030002, Руководство пользователя

Страница: 13 / 28

13
12. Stopping
·
To reduce the motor idling before to stop it, letting after the lever of safety device.
·
To stop the motor, as indicated on the instructions of its user manual.
13. Maintenance
· Warning! It is obligatory to switch off the motor (in the electric system to turn
off also the socket).
·
To lubricate on base of the use frequency, both the blades pivots and the blades
adjusting screw.
·
To clean and to keep in perfect conditions the used tools.
·
When the machine is not used, it recommend itself to clean the same machine
and the blades from concrete residuals and to position it in a safe place out
accessible of the children.
·
To verify periodically the tightening bolts.
·
The possible repairs exclusively must be made by technical skilled staff.
· An use not corrected, not original spare parts and modifications not authorised
exclude the manufacturer from every responsibility and guarantees.
·
Warranty! It is obligatory to do of tests on the machine at least one time
every years by your trust dealer or by our Assistance Service Department for to
keep stable the same security level and working of the machine in the time.
·
Every days before to start a job, the user must verify the efficacy of the safety
devices and controls.
· Every days, before to begin the cut must control the belts voltage. If it is
necessary, must stretch again the belts with moderation (to loosen 4 tightening
nuts of motor, to act on the belts, making attention to keep the ranged motor, until
to get a correct voltage; so to stop again).
·
Every day to verify the motor oil; to replace oil like recommended from
manufacturer (see the user manual on this subject).