Isoplam L030002, Руководство пользователя

Страница: 10 / 28

10
9. Controls before starting
SECTION FOR DIESEL AND GASOLINE MOTORS
· To read with attention the starting and motors maintenance instructions.
·
To consider the environment of work place.
·
To control the full of fuel.
·
Warning! To make the refuelling with switched motor off and in a good windy
environment.
·
Warning! To not fill too much the fuel tank. To avoid dropping of the fuel, in
particular the gasoline, during the refuelling on the motor hot parts and on the
parts that can damage oneself.
·
Warning! The gasoline is much inflammable and explosive in some
conditions. To not smoke or to not leave the free flames or the sparks in the same
place where the machine is refuelled. The vapours of the gasoline can to catch
fire. If the gasoline is fallen, to make sure that the job place is perfectly dry, before
to start the motor.
SECTION FOR ELECTRICAL MOTORS
·
Warning! To verify that the feed voltage of machine is in accordance with
voltage of net (see the identity nameplate on section 3.0 of this user manual).
·
Warning! It is obligatory to provide to the machine grounding.
·
Warning! On all machines supplied with 400V electric motor, it is necessary
to make sure the rotation direction is that indicated by arrow on the belts guard. In
the contrary case it is absolutely forbidden the use of the machine; therefore to
contact your trust dealer or our Assistance Service Department (tel. 039 0722
59290).
·
The safety device doesn’t allow the start of machine if this has stopped for sudden
want of current.
·
Join forces to the mains by a feed cable of suitable section 4x4mm
2
or 5x4mm
2
with maximum depth to 100m.
·
The motor protection is insured to the magneto-thermal switch.
·
To fill the water tank, but before to remember to close the faucet.