ISON IS-DG500P Series, Быстрое руководство по установке

Страница: 9 / 13

9
Connecting the Ethernet Interface (RJ45 Ethernet)
IS-DG500P provides two types of electrical (RJ45) and optical (mini-GBIC) interfaces. For example,
on
IS5010-8T(GT)-2SFP
, Port 1-8 are electrical only (RJ45).

To connect to a PC, use a straight-through or a cross-over Ethernet cable,

To connect the IS-DG500P copper Port to an Ethernet device, use UTP (Unshielded Twisted Pair)
or STP (Shielded Twisted Pair) Ethernet cables.
The pin assignment of RJ-45 connector is shown in the following figure and table.
Connecting the Ethernet Interface (Fiber)
Prepare a proper SFP module and install it into the optical port. Then you can connect fiber optics
cabling that uses LC connectors or SC connectors (with the use of an optional SC-to-LC adapter) to
the fiber optics connector.
Refer to
錯誤
!
找不到參照來源。
for the normal operational LED status.
Pin Assignment
PoE
Assignment
1,2 T/Rx+,T/Rx- Positive V
Port
3,6 T/Rx+,T/Rx- Negative V
Port
4,5 T/Rx+,T/Rx- X
7,8 T/Rx+,T/Rx- X