ISON IS-DG500P Series, Быстрое руководство по установке

Страница: 13 / 13

13
To connect the host PC to the Console port, a RJ45 (male) connector-to-RS232 DB9 (female)
connector cable is required. The RJ45 connector of the cable is connected to the Console port of
IS-DG500P; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of
the Console cable is shown below:
SYSTEM RESET
The Reboot button is provided to reboot the system without the need to remove power. Under normal
circumstances, you will not have to use it. However, or rare occasions, the IS-DG500P may not
respond; then you may need to push the Reboot button.
Reboot Button