iSolution imove 700s, Руководство пользователя

Страница: 9 / 13

16B
R-Gobo 1 offset
Press the ENTER button for at least 12 seconds into offset mode, turn jog wheel up to
when the R-Gobo 1 offset is shown on the monitor. Pressing ENTER button and the
display will blink. Use jog wheel to adjust the R-gobo 1 home position. Once the R-gobo has
been selected, press the ENTER button to setup or automatically return to the offset
functions without any change press the ESC button. To go back to the main functions
without any change after 10 seconds
Gobo 2 offset
Press the ENTER button for at least 12 seconds into offset mode, turn jog wheel up to
when the Gobo 2 offset is shown on the monitor. Pressing ENTER button and the
display will blink. Use jog wheel to adjust the gobo 2 home position. Once the gobo has
been selected, press the ENTER button to setup or automatically return to the offset
functions without any change press the ESC button. To go back to the main functions
without any change after 10 seconds
Prism offset
Press the ENTER button for at least 12 seconds into offset mode, turn jog wheel up to
when the Prism offset is shown on the monitor. Pressing ENTER button and the display
will blink. Use jog wheel to adjust the prism home position. Once the prism has been
selected, press the ENTER button to setup or automatically return to the offset functions
without any change press the ESC button. To go back to the main functions without any
change after 10 seconds
R-Effect offset
Press the ENTER button for at least 12 seconds into offset mode, turn jog wheel up to
when the R-Effect offset is shown on the monitor. Pressing ENTER button and the
display will blink. Use jog wheel to adjust the R-Effect home position. Once the R-effect has
been selected, press the ENTER button to setup or automatically return to the offset
functions without any change press the ESC button. To go back to the main functions
without any change after 10 seconds
Iris offset
Press the ENTER button for at least 12 seconds into offset mode, turn jog wheel up to
when the Iris offset is shown on the monitor. Pressing ENTER button and the display
will blink. Use jog wheel to adjust the iris home position. Once the position has been
selected, press the ENTER button to setup or automatically return to the offset functions
without any change press the ESC button. To go back to the main functions without any
change after 10 seconds
17B
4.4 Easy Controller
The easy remote control is used only in master/slave mode. By
connecting to the 1/4” microphone jack of the first unit, you will find that
the remote control on the first unit will control all the other units for Stand
by, Function and Mode.
Stand by Blackout the unit
Function
Strobe
1. Sync. strobe
2. Two-light strobe X/Y moving show pattern
selection
( Show 1 ~ Show 4 )
Please refer to 4.2. Main
Functions- Show mode
Gobo/Color selection
1.Hold
on for gobo
selection
2.Press for color change
X/Y moving setting
1.Pan position
2.Tilt position
3.Dimmer
First set Master unit, then
set Slave units’ position
Mode
Sound 1
(LED off ) Sound 2
(LED slow blinking) Slow/Sound 3
(LED on) Position/ Latch
(LED fast blinking)
5. How To Control The Unit
You can operate the unit by universal DMX controller:
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be effected at once. Every time you turn the unit on, it will show “IM-1200S
resetting…” on the monitor and move all the motors to their ‘home’ position and you may
hear some noises for about 20 seconds. After that the unit will be ready to receive DMX
signal.
5.1. DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address
from 1 to 512 channel so that the units can receive DMX signal.
Press the ENTER button up to when the DMX address is shown on the monitor.
Pressing ENTER button and the monitor will blink. Use jog wheel to change the DMX512
address. Once the address has been selected, press the ENTER button to setup or
automatically return to the main functions without any change after 10 seconds. To go back
to the previous functions without any change press the ESC button.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Mode Fixture 1 Fixture 2 Fixture 3 Fixture 4
16 CH 1 17 33 49
22 CH 1 23 45 67