Chapter 4 Configure as a Bridge
Two of these devices have capability to communicate with each other when these
two devices are working in the “Bridge” Mode. Users can connect two or more wired
LANs together via wireless connection with wireless bridge function. The connection
is as follows:
Figure 4.1
Note:
This device can’t be a wireless AP when it has been operated as a wireless
bridge.
This means there is no wireless client can make the connection to this device
when it’s in the “Bridge” mode.
4.1 Bridge Configuration
1. Login this device with the administrator’s password as “admin” (default).
2. Select Primary Setup.
3. In the Primary Setup page, make sure the Mode is Bridge.
4. Enter the address into IP Address field which is in the same subnet with your
network environment.
5. Set the “Channel” of this device and another one which you want to connect in
the same channel.
6. Save the settings above and then reboot this device.
11