1
2
2 Power supply bay
1 Power supply unit
Figure 3. Removing a power supply from the node
4. Insert a new power supply into the empty power supply bay with the label side facing up.
5. Push the new power supply firmly but carefully into the bay. The retaining latch automatically clicks into place to
secure the power supply.
6. Connect a power cord to the new power supply.
The LED on the power supply turns green when the power supply begins supplying power to the node.
7. Return the old hardware to Isilon Technical Support.
For more information, see
on page 6.
10
©
2011 Isilon Systems, LLC.
Power supply
