manualshive.com logo in svg

ISHIDA UNI-7, Руководство пользователя

Поделиться
Скачать
ISHIDA UNI-7 Скачать руководство пользователя страница 3

NOTICES 

 NOTICES 

 

 IMPORTANT 

NOTICE 

Those who handle the machine must be aware of the hazards involved. These dangers may not be 
obvious, so it is imperative to follow the instructions detailed in this manual when installing, operating, 
inspecting, or servicing the machine. Therefore, we recommend that you thoroughly read and 
understand this manual before installing, operating, inspecting, or servicing the machine. 
ISHIDA is not liable for any damage, loss or injury that results from incorrect operation, insufficient 
caution, unauthorized modifications to the machine, or failure to follow the instructions contained in 
this manual.   
 
 

 LIMITATIONS 

OF 

LIABILITY 

ISHIDA assumes no responsibility for special, indirect, or consequential damages, loss of profits or 
commercial loss in any way connected with the machine, whether such claim is based on contract, 
warranty, negligence, or strict liability. 
ISHIDA assumes no responsibility for the user's programming of this machine, or any consequence 
thereof. 
In no event shall ISHIDA be responsible for warranty, repair, or other claims regarding the machine 
unless ISHIDA’s analysis confirms that the machines were properly handled, stored, installed, and 
maintained and not subject to contamination, abuse, misuse, or inappropriate modification or repair.   
 
 

  CHANGE IN SPECIFICATIONS 

Machine specifications and accessories may be changed at any time due to improvements or other 
reasons. Consult with your ISHIDA representative at any time to confirm the actual specifications of 
the purchased machine. 
 
 

 ERRORS 

AND 

OMISSIONS 

The information in this manual has been carefully checked and is believed to be accurate; however, 
no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 
 
 

UNI-7 User’s Manual 

i 

Содержание UNI-7






















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды