For steps 27 - 29, see Fig. 7
27. Dismount the Film Feeder unit by the following steps:
• Pull the right and left wrapping plates inwards before removing the Film Feeder.
• Pull up the left end of the Film Feeder to disengage from the pulley slot.
• Slide the Film Feeder off the two mounting blocks.
28. Rotate the Film Feeder unit 90 degrees toward the back (white belt faces to the rear).
29. Remove the Film Feeder from right side of the wrapper.
Be careful not to damage any of the loose components
on the left side of the Film Feeder unit during removal.
Fig. 7
OMNi-4000 Film Feeder Replacement Manual
8