Chapter 3 Test Mode
AC-4000H Service Manual No. 085-7323-08
3-10
BIOS COPY is not displayed in test mode.
When using BIOS COPY
•
If the machine locks, or the test mode entry is not possible, enter [APPLY COPY]
→
[BIOS COPY] and
a transmission end message appears in [BIOS COPY], then press the ZERO key twice.
[EXEC] + [PASS] is displayed.
•
Standing up state after BIOS COPY is operated.
• Internet Protocol address: 192. 168. 10. 1
• Log-in: TEST
• Password: USNET
•
Perform “APPLI COPY” in the same operation as the above-mentioned.
BOOT COPY starting procedure
1.
Turn on the power switch while pushing the Memory button.
Note: Press the [
↓
] key. Then, “BOOT COPY” is displayed.
SW1
J1
PK-236A
Memory button