Iseo x1R Easy, Быстрый старт

Страница: 19 / 100

19
ACTIVATING THE TAG “MASTER KEY”:
Access the “programming” facility
A.
with the door open, press the spring latch , with one finger
and keep it pressed, then bring any TAG (of those supplied)
close to the receiver located on the external plaque
(fig. 1).
B.
the acoustic alarm will emit a scale of rising sounds to tell you
that the lock is in the “programming” mode.
The lock will only remain in programming mode as long
as you keep the spring latch pressed. If you release the spring
latch, you will automatically leave the programming m
C
.
now chose any of the TAG x.Keys supplied and bring it close to
the receiver located on the external plaque . The acoustic alarm
will emit two short tones to confirm programming of the TAG
as the “master key”.
Release the pressure on the spring latch to exit the pro-
gramming mode.
ACTIVATING THE “SERVICE” TAGS:
Access the “programming” facility
A.
With the door open, hold spring latch down with one fin-
ger and bring the TAG programmed before at a “master” lev-
el near the receiver on the external plaque
(fig. 1).
B.
the acoustic alarm will emit a scale of rising sounds to tell you
that the lock is in the “programming” mode.
The lock will only remain in programming mode as long
as you keep the spring latch pressed. If you release the spring
latch, you will automatically leave the programming mode.
1
1
5
5
p
5
P
p
TO START
fig.1
fig.2
fig.3
10S0440_FIAM QG10 02 EN 7-07-2010 10:00 Pagina 19