Iseo x1R Easy, Быстрый старт

Страница: 20 / 100

20
C. so, while keeping the spring latch constantly pressed all
the time, now press the black button located on the internal
plaque
(fig. 3) and keep it pressed for at least one second:
the buzzer emits just one short tone (1 beep). Every TAG that
you bring close to the receiver (fig. 1) will be registered at the
“service” level. The buzzer confirms programming of each TAG
by means of a short sound (1 beep). Once the programming
phase has been completed, proceed to enabling all the TAGs
programmed at a “service” level, by holding down for at least
one second the black button on internal plaque
(fig. 3).
The buzzer emits two brief sounds (2 beeps).
Release the pressure on the spring latch to exit the pro-
gramming mode.
HOW IT WORKS
From outside the home, when you bring the TAG x.Key close to
the reading area located on the external plaque
(fig. 4), the lock
will open and you can access the interior. If the functioning crite-
ria have been programmed to do this, the door will be locked au-
tomatically when you close the door.
There are other options for exiting through the door:
• press the the green key located on the internal plaque (Fig. 5)
• press a remote button (optional) which can be located also re-
mote from the door (for example, the interphone key or an or-
dinary button)
• through the mechanical key
NOTE:
remember that the FIAM x1R electronic lock can function always
and in any case, including critical cases, from both outside and
inside, with the aid of the mechanical key, which can be trans-
ported inside the TAG.
1
5
2
2
5
fig.4
fig.5