iPC10 / iPC20 Operating instruction
Page - 6
3.2 Mounting
For mounting the iPC15 use the mounting holes on the cover plate.
Using iPC15 with isel 22“ TFT display
When using the iPC15 with a isel
22” TFT display the mounting is
done by a rack mount on the back
side of the TFT display.
Note that there is enough free zone on the louvers for air circulation. Ignoring
this fact causes overheat and potential defect of the iPC
Please avoid extreme environment conditions. Protect the control PC for dust,
humidity and heat. Do not cover the louvers!!
3.3 Switch on iPC15
Switch on iPC15 by pressing the PC-start button on the front side of the computer (see also
Chapter: 2.2) ore use the contacts of the Sub-D9-pin female connector.
If iPC15 is switched on the PC-start button is green lighted (not on
version for control cabinet).
