Isel 440705, Руководство пользователя

Страница: 5 / 8

5
Brakes / hydraulic and electric with regenerative power
To come to a standstill, the existing handbrake must be used. To prevent the EuroScooter from rolling independently when in a
stopped position, the parking brake must be used. Since the brake is operated hydraulically, check and be aware of leaks as well as
check the oil level. Before the hydraulic brake engages, an electronically driven system brakes slightly, allowing energy back into the
batteries.
Function display and light
The function display has the following switching options with key operation.
1 - Off
2 - Electric motor on
Front and rear lights are switched directly on the device and can be charged via USB port.
The function display additionally shows the battery charge status and the LED light control lamp.
Handbrake and parking position
The hydraulic handbrake of the EuroScooters require special
attention and all functions must be checked before each ride to see if functions suffice.
The parking brake functions by locking the brake lever in the dressed position. The
determination can be made by pulling the brake lever and releasing the locking mechanism.
Handlebar basket
The EuroScooter is equipped with a handlebar basket. Hang the handlebar basket on
the handlebar. Make sure that the permitted basket weight does not exceed the maximum
of 4 kg. Note that a basket filled with luggage can significantly affect the handling
of the EuroScooter.
General electronics
The battery level can be read off the function display on the handlebar. At low display, the battery is almost empty and
must be charged or replaced with a new, charged battery. If you don’t use the electric motor for more th an a few days
the battery should be recharged (trickle charging). If you turn off the device, be sure to turn Electronics off. Protect the electronics
and the rechargeable batteries from penetrating water and extreme frost.
Charging the battery
For optimal condition and capacity of the battery, we recommend charging the battery at room temperature.
For safety reasons, there should be no flammable material in the area whilst charging.