background image

 

 

 

Delivery 

 

EuroScooter (with possible packaging) 

 

Instructions for use (-en) 

 

Charger ( accessory ) 

 

Battery (number depends on options) 

Usage  

The EuroScooter was designed for normal use on a flat, solid surface. Caution is required at all times in using the EuroScooter 3Rad-

mobile. 
Follow the safety instructions exactly as described in this user manual. Likewise, the current local traffic regulations must always be 

adhered to. Any other use, including any damage that may result thereto, is not the responsibility of the manufacturer. The 

EuroScooter is designed for in-house transport of goods with one person (driver). Due to its small dimensions, it can pass through 

normal doors as well as passenger lifts. 

For road traffic, the vehicle is limited to 15km / h and is listed as “mobility assistance” and authorized individually.

 

Safety instructions 

Important: First read the safety instructions before using the EuroScooter! 

 

 

The EuroScooter is suitable for transporting one person plus transport crates. Material and transport crates must be 

secured against slipping. 

 

Use only original parts and accessories from ISEL 

 

Test the reverse and forward gear finctions of the electric motor. Always take care when handling the switch on the 

electric motor not to be surprised by the sudden reaction of the electric motor. Take care to not inadvertently switch on 

the reverse function of the electric motor. 

 

Make sure the EuroScooter is in good condition before each use. Before driving always check as to whether the brake and 

the lighting work correctly and make sure that enough air (recommended: 2,5-up to 3 bar) is in the tires. 

 

Regularly check that the wheels, the handlebars and the saddle are tight as well as to whether all screw connections are 

well tightened. 

 

Make sure your fingers and limbs cannot be trapped while driving or steering around obstacles. Drive only with 

appropriate fitted legwear. 

 

Pay attention to any outstanding, solid or loose parts in or on the EuroScooter. These can cause damage to the 

environment or the EuroScooter. 

 

Pay attention to any outstanding, solid or loose parts in or on the EuroScooter. These can cause damage to the 

environment or the EuroScooter. 

 

When parking or left unattended, always leave the EuroScooter powered OFF and locked.  This will prevent accidental use 

and / or theft.  

 

Do not use high pressure or steam cleaners for cleaning. 

 

Do not expose the EuroScooter to direct sunlight: Parts can get hot and this may result in skin irritation and minor burns. 

 

Use the EuroScooter only on a solid and level surface. Soft, slick or uneven terrain increases the risk of dangerous 
situations. 

 

Drive carefully on paths that are slick due to rain, ice or snow. 

 

When driving on an inclined slope or at excessive speed, make sure that the vehicle does not tip. 

 

Avoid inclinations of more than 15 °. Driving (forwards or backwards) could be a dangerous factor. 

 

Assume that the braking distance on a slope and increased load would be longer compared to that on a horizontal 

surface. 

 

Make sure that when driving downhill or when driving through a tunnel no dangerous speeds are not incurred. Brake in 

time.  

 

Drive carefully along curbs. An uneven surface increases the danger of tipping. 

 

Always drive onto a sidewalk via a driveway. If there is no driveway, always drive straight and frontal on the sidewalk 

forwards or backwards. Do this at a reasonable speed. 

 

The maximum threshold height for ascending or descending is 10 cm. 

 

When transporting the EuroScooter in a motor vehicle, always change to a fixed seat in the motor vehicle. EuroScooter 

may not be used as seating in a motor vehicle, even if the EuroScooter is secured with a transport lock.

 

 

Содержание 440705









Отзывы: