Iseki SBC550X Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 105

background image

VI. PRE-OPERATIONAL ROUTINE INSPECTION

41

VI. PRE-OPERATIONAL ROUTINE INSPECTION

It is essential for avoiding accidents or breakdown during operation to keep the lawn mower in goon condition. The
following pre-operational checks should be performed without fail before starting daily operation.

2. WAY OF INSPECTION AND MAINTENANCE

Refer to the section of “MAINTENANCE.”

WARNING: Before inspection, be sure to
park the lawn mower on a level and hard
ground, stop the engine, lower the mower
deck onto the ground, remove key from the
starter switch, apply the parking brake (GE
TYPE) or the parking lock (E TYPE), move
the PTO lever to the OFF ( ) position, and
check to see that the mower blades have
completely ceased rotating.
Machine weight balance is a very important
factor for safe operation. When your machine
is equipped with an implement such as a
cabin, etc., never fail to ask your dealer about
machine balance. Always follow their advice.

1. INSEPCTION ITEMS

(1) Anything that was abnormal in the previous operation.

(2) While walking around the lawn mower:

   • Tire inflation
   • Exterior parts (broken or deformed covers or the like)
   • Oil leakage (engine oil, transmission oil, fuel, etc.)
   • Inspection and cleaning of air-intake port
   • Inspection of engine oil level
   • Inspection of coolant level
   • Inspection of fan belt
   • Inspection of fuel level
   • Inspection of fuel filter
   • Inspection of transmission oil level
   • Inspection of front and rear wheel tightening bolts

and nuts

   • Inspection of rear axle chain case oil level
   • Cleaning of radiator and radiator screen
   • Inspection of electrical apparatus
   • Inspection of mower blades
   • Inspection of mower-blade driving belt
   • Inspection of mower exterior parts like covers for

damage and deformation

   • Oil leakage from mower gear case
   • Inspection and cleaning of gauge wheels
   • Inspection for loose broken or lost bolts and nuts
   • Inspection for loose, broken or lost pins and clips

(3)  While sitting in the operator's seat:
   • Inspection of brake
   • Adjustment of seat

(4)  After having started the engine:
   • Confirmation of the operation of safety switches
   • Inspection of the operation of the steering wheel

«
...
40
41
42
43
44
...
»

Содержание SBC550X










































































































Отзывы:

Нет отзывов

Похожие инструкции для SBC550X

Бренд: Lawn-Boy Страницы: 24

Бренд: Lawn-Boy Страницы: 84

Бренд: Lawn-Boy Страницы: 20

Бренд: YAT Страницы: 41

Бренд: Alamo Страницы: 168

Craftsman 917.250262

Бренд: Sears Страницы: 60

Бренд: Jacobsen Страницы: 20

Бренд: Walker Страницы: 92

Бренд: Scag Power Equipment Страницы: 41

Бренд: Cub Cadet Страницы: 39

Бренд: VonHaus Страницы: 20

Бренд: Meec tools Страницы: 38

Бренд: DR Power Страницы: 44

Бренд: Lux Tools Страницы: 192

Бренд: Dolmar Страницы: 88

Yard force YF48vRX-RER38

Бренд: MEROTEC Страницы: 45

Бренд: Simplicity Страницы: 18

Бренд: Simplicity Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды