iseg NHS 6201p, Руководство пользователя

Страница: 5 / 20

2 Technical Data
SPECIFICATIONS NHS Standard NHS High Precision
Polarity Factory fixed, positive or negative
Floating principle Common Ground
Potential difference none
Ripple and noise (f > 10 Hz) < 10 mV
p-p
< 5 mV
p-p
Ripple and noise (f > 1 kHz) < 2-3 mV
p-p
< 1-2 mV
p-p
Stablity
Stability [ΔVout / ΔVin] 1 • 10 -4 • V
nom
Stability - [ΔVout / ΔRload] 1 • 10
-4
• V
nom
Long term stability (1h warmup) 24h < 5 • 10 -5 • V
nom
< 2 • 10 -5 • V
nom
Temperature coefficient 50 ppm / K 30 ppm / K | 10 ppm / K (option TC)
Resolution - The resolution of measurable values depends on the settings of the sampling rate and the digital filter!
Resolution voltage setting 2 • 10 -6 • V
nom
Resolution current setting 2 • 10 -6 • I
nom
Resolution voltage measurement 2 • 10
-6
• V
nom
1 • 10
-6
• V
nom
Resolution current measurement - full range 2 • 10 -6 • I
nom
1 • 10 -6 • I
nom
Resolution current measurement - 2 nd range n/a 50 pA [I
out
< 20 μA]
Measurement accuracy - The measurement accuracy is guaranteed in the range 1% • V
nom
< V
out
< V
nom
and for 1 year
Accuracy voltage measurement ± (0.01 % • V
out
+0.02 % • V
nom
) ± (0.01 % • V
out
+0.01 % • V
nom
)
Accuracy current measurement - full range ± (0.01 % • I
out
+0.02 % • I
nom
) ± (0.01 % • I
out
+0.01 % • I
nom
)
Accuracy current measurement - 2
nd
range n/a ± (0.01 % • I
out
+ 4 nA)
Sample rates (SPS) 5, 10, 25, 50, 60, 100, 500
Digital filter averages 1, 16, 64, 256, 512, 1024
Voltage ramp up to 0.2 • V
nom
/s | opt. up to 0.75 • V
nom
/ s
Hardware limits Potentiometer per module [V
max
/ I
max
]
Operating mode Full module and channel control via: Front panel,
USB interface: iseg SCPI,
CAN interface: EDCP (Enhanced Device Control Protocol)
Module status green LED turns on if the channel has the status “Ready”
yellow LED turns on if the channel has the status “HV ON”
System connector NIM standard compliant connector
HV connector BNC | SHV
Digital Interface USB interface (potential free)
CAN interface (potential free)
Case 1/12 NIM standard cassette
Safety Loop connector Lemo 2pole: FFA.0S.302.CLAC
Safety Loop socket Lemo 2pole: ERA.0S.302.CLL
Single channel inhibit connector SUB-D9 male
Protection INHIBIT, Safety loop, short circuit, overload, hardware V/I limits
NHS – NIM standard High Voltage Power Supply | Last changed on: 01.10.2018 |
www.iseg-hv.com
5/20