VIDEO DOORBELL INSTALLATION
Step 8 Install Wedge Bracket (Optional)
In a Wedge bracket, you will find:
two short screws
two long screws
Wedge bracket
Long screw
Long screw
short screw
short screw
Step 7 Install Wall Bracket
VIDEO DOORBELL INSTALLATION
•
First, pierce the rubber of the wall bracket through
wiring holes using your doorbell wires.
•
Use the bracket and the small level as a template to
position.
•
Mark the four corner holes.
•
On stucco, brick, or concrete install the anchors using
a power drill and the drill bit provided.
•
Drive the screws into the anchors, or directly into your
wall until they are flush with the Wall bracket, and
the bracket is flat against your wall.
•
On wood or siding, you can screw directly into your wall.
•
Use the Phillips-head end of the iseeBell screwdriver to
screw in your Wall bracket.
Step 9 Connect wires to iseeBell
• Connect wires to the power termnials on the back of iseeBell in
any order.
Your new wiring must be connected to a power supply voltage
of 9-24 V AC/DC
,
1 Amp if you don’t have existing doorbell wires.
