ISC RP290, Общие инструкции по использованию

Страница: 10 / 40

10
RIGGING R
OPE WRENCH
RP29X Rigging Rope Wrench: Issue A - March 2019
[A] Nomenclature
1. Locking Pin Mechanism
2. ISC Logo
3. Model Variant
4. Maximum Bearing Loads (RP290 70kg, RP292 120kg)
5. Wheel (Bushing RP290, Locking Bearing RP292)
6. Serial Number
7. Dogbone (RP290 Black, RP292 Grey)
8. Side Plates
9. Threading Direction
10. Slic Pin
11. Maximum Rope Diameter
[B] Care and Maintenance
[C] Locking Pin Mechanism
1. The Top Pin is in its locked position
2. Push the mechanism to release the scroll pin from the groove and begin to turn 180°
The dimple on the face of the lock refers to the position of the scroll pin. When it is
facing downwards, the lock is secure. When using the device, ensure that it is orientated
so that the lock and dimple are facing away from the anchor point
3. Pull the pin through the slot to release the axle
4. Position the sling (maximum 13mm diameter) and place locking axle back into its
original position to secure the mechanism
[D] Misuse
1. A maximum weight of 70kg load for RP290, and a maximum weight of 120kg load
for RP292. Be sure to know the working load limits of the device before use. The colour
of the dogbone is one way to easily identify the working load limit (RP290 Black 70kg,
RP292 Grey 120kg)
2. Incorrect installation of the working line will cause the device to not function
3. The device is not suitable for use as a Live Loads Device
4. Ensure a secure connection between device and anchor point (tree) with sling
5. The Rigging Rope Wrench should not be used for negative rigging
6. It can be dangerous if the user on the ground stands directly underneath the device
when performing a lowering operation. This can cause the device to hang up and deny
the wrench element from swinging into position. The user on the ground should stand
further to one side to increase overall control
[E] Pre-use Check
1. Ensure all moving parts can be moved freely. On the RP290 70kg model, the wheel
should rotate freely in either direction. On the RP292 120kg model, the wheel should
rotate in one direction and lock in the opposite direction - This should match with the
directional laser markings on the frame
2. Ensure the locking axle functions properly
3. Ensure that there is no damage to any part of the device that would impede proper
use
4. Ensure movement of the dogbone is free between the upper and lower sections
5. Ensure the locking mechanism sits within its designated slot. This ensures that the
device is locked and appropriately ready for use
English EN