IS5 COMMUNICATIONS iES18G Series Скачать руководство пользователя страница 73

Страница: 73 / 98

iES20G/iES18G

Series User’s Manual

iS5 Communications Inc.

5.1.13.6

Port Monitoring

The Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX.

TX monitoring sends data that egressed out of the checked TX source port to a selected TX

destination port. RX monitoring sends data that ingress in of the checked RX source ports out

to a selected RX destination port. It also sends the frame to where it normally would have

gone.

Note: Keep all source ports unchecked to disable port monitoring.

Port monitoring interface

The following table describes the labels for the Port Monitoring screen.

Label

Description

Destination Port

The port that will receive a copied frame from a source port for

monitoring purpose.

Source Port

The port that will be monitored. Check the TX or RX to be monitored.

The frames that leave the switch port and proceed somewhere outside

of the network.

The frames that originate from outside the network and are received

by the switch port within the network.

Apply

Click “

Apply

” to activate the configurations.

Help

Show help file.

Содержание iES18G Series



































































































Результаты поиска

Содержание iES18G Series

Отзывы:

Похожие инструкции для iES18G Series

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS iES18G Series, Руководство пользователя

Результаты поиска

Содержание iES18G Series

Отзывы:

Похожие инструкции для iES18G Series

Бренды по названию

Популярные бренды