IRT-6630-DTR
I.R.T. Communications Pty Ltd | www.irtcommunications.com
Page 10 of 22
Revision 01
Front Edge LED and Switch Locations
SW_boot switch: Default Reset Switch.
User set names and switch position are stored within
memory so that in the event of a loss of power this
information is restored on resumption of power.
If the default Reset Switch is pressed whilst powering
or inserting the card, the card will default to factory
preset settings.
Tx Laser
(Present – Green; Failure – Red)
Rx Input
(Present – Green; Failure – Red)
Tx SD rate I/P
Rx SD rate O/P
Tx HD rate I/P
Rx HD rate O/P
Tx 3G rate I/P
Rx 3G rate O/P
IR
T
-6
6
3
0
-D
T
R
Front Edge LED Indicators
Green/Red LED: GREEN – Communication with frame’s Network card.
RED - No communication with Network card / No Network card.