background image

If     is not on SET TIME/DAY, press NEXT STEP until     lines 
up with SET TIME/DAY.

Press DAY/STN until arrow points to current day.

Press ON/+ or OFF/- to set current time. 

Press NEXT STEP to enter watering time.

Enter watering time to all stations you wish to assign to this 
program. Each station can be programmed to have a different 
watering time.

Press ON/+ or OFF/- to set your watering time.

Press DAY/STN to select your next station in this program.

Repeat for all the stations.

Press NEXT STEP to advance to the next programming step.

You can either select the days of the week you wish to water 
or select days cycle. The arrow pointing under SU is flashing.

Press ON/+ for the days you wish to water.

Press OFF/- for the days you wish to skip irrigation, or

Press DAY/STN until arrow points to days cycle [        ]

Press ON/+ or OFF/- to select your days cycle.

Both digits will advance together. The right digit displays the 
selected days cycle, the left digit displays the remaining days 
to irrigation. If 1 is selected = Every day. 2 = Every other day. 
3 = Once every 3 days (1 to 14 day cycle possible). 

Press DAY/STN if you wish to return to days of the week.

Press NEXT STEP to program the start time.

Press ON/+ or OFF/- to set the time.

Press NEXT STEP to set next start time.

               Only one start time is required to start a program. 

To either increase or decrease watering time for all stations in a 
program, use percentage scaling. Your current setting of 
watering time represents 100%. You can get to the Water 

Budget

 position from any Watering Time position. 

Press DAY/STN until you pass all stations and the display 
shows 

100

 and the active stations in that program are flashing.

Press ON/+ to increase and OFF/- to decrease the percentage 
from 10% to 200%.

i.e.: If stations in PI are set at 10 minutes run time and you increase the 
percentage to 150%, they will now run 15 minutes each.

Press NEXT STEP to skip to 

MANUAL

 mode. 

STN

=Station (Zone)

Will display Time & Day, open station and power failure. 

Press OFF/- in AUTO RUN mode to suspend all watering. 
OFF will appear in the display.

Press ON/+ in AUTO RUN mode to resume watering.

To get to 

Manual

mode from any
position, press
NEXT STEP
continuously.

Two MANUAL modes are available:

Manual Start Per Station (only that station)

Press ON/+ to open the station (arrow pointing to the station 
number will stop flashing). Press OFF/- to turn off the station.

Press DAY/STN to select your next station.

If you leave the station ON, it will close after its’ programmed 
watering time. The first priority is the watering time for program 1, 
the 2nd priority is the watering time for program 2, and if no 
watering time was programmed, the station will open for 2 minutes. 
After the station is closed, the controller will skip to AUTO mode.  
Press NEXT STEP to select the next manual mode.

Man

ual Start Per Pr

ogr

am — Semi-A

uto

In this mode, you can turn on all the stations programmed in 
program 1 or program 2. The valves will open in sequence.
The 1st programmed station in this program will flash.

Press ON/+ to start the cycle and OFF/- to terminate it.

Press NEXT STEP to select program 2. Repeat as in program 1. 

 Press NEXT STEP to advance to AUTO RUN mode.

The first station of program 1 will start watering at the time you selected and the other 
stations in this program will operate sequentially, one after the other, automatically.

To enter program 2 (PII) press NEXT STEP and repeat from 

*

 to 

**

. To skip

program 2, press NEXT STEP continuously until arrow points to 

MANUAL

.

PR

OGRAMMING STEPS

Irrigation programming consists of 3 parameters:

 

1

  Watering time for each station      

2

  Irrigation days      

3

  Program start time

Each station can be assigned to a program by entering watering duration in that program.
In a 

cycle

, all stations belonging to a program will open sequentially, one after the

other. Stations can be assigned to both programs.

If you press ON/+ or OFF/- continuously, the digits will advance quickly.

*

NOTE

SET 

TIME/DAY

WA

TERING 

TIME

PI (Program 1)

IRRIGA

TION DA

YS

DA

YS ON/OFF

           PI

DA

Y CYCLE

(Interval)

2

3

STAR

T 1

PI

**

NOTE

NOTE

MANUAL

AUTO RUN/OFF

(OFF)

WA

TER BUDGET

PI & PII

 

1

 

2

PROGRAM 

STAR

T TIMES

 

3

Содержание Junior Plus 2











Отзывы: