Irritrol CMR-KIT, Руководство пользователя

Страница: 9 / 24

2 – Using the provided wood screws (or other appropriate
fasteners), secure the bracket to the wall as high as
possible.
If installing the plug assembly bracket onto
drywall or masonry, screw anchors must be used.
3 – With the receiver lock pulled up, align and install the
receiver onto the plug assembly. Push the lock down to
engage the groove in the plug assembly. See Figure 1.
CAUTION: Never connect the remote control
power wires to any voltage source greater than
24 VAC. Failure to comply will result in severe
equipment damage and voided warranty.
4 – Disconnect power to the controller.
5 – Route the receiver plug wiring through the base of the
controller cabinet.
CMR-KIT Indoor Installation
7
ACATIVITY
Figure 1
Irritrol CMR-KIT 10/27/06 10:55 AM Page 7