Irritrol CMR-KIT, Руководство пользователя

Страница: 15 / 24

CMR-KIT Setup Options
About Communication Address Codes
The handheld transmitter and receiver provided in the
CMR-KIT kit are programmed by default with the same
three-digit communication address code ranging from
001 to 999 and requires no additional adjustments for
initial remote control operation.
Due to the long-range capability of the CMR-KIT
transmitter, cross talk to more than one receiver is possible
if the receivers are located within the transmitter’s
broadcast radius. So, it is generally good practice to assign
a unique address to each receiver when operating multiple
remote control irrigation systems with a single CMR-KIT
handheld transmitter.
The transmitter and receiver address
code is accessed and set through the transmitter keypad.
Set Transmitter to Receiver’s Address Code
1 – Press and hold the ON button until the
transmitter powers up.
2 – Press and the Address button to access
the address code function. The current
address code will be displayed.
3 – Press and hold the Address button
until the word ADDRESS and the third
digit of the address code begin flashing,
then release.
The display will automatically
revert to the initial power-up screen after
30 seconds of inactivity.
4 – To adjust the digit, press the up or
down arrow button. To select another
digit, press the
left or right arrow
button. Repeat in the same manner to
select the desired address number
5 – When finished setting the address code, press
the Address button.
CMR-KIT Setup Options
13
Irritrol CMR-KIT 10/27/06 10:55 AM Page 13