Page 17 of 21
Failure
Possible Cause
Corrective Action
Lines on surface
of workpiece.
Impurity on surface of wheel.
Dress the grinding wheel.
Workpiece not being held tightly.
Use a holding device to more firmly
retain the workpiece.
Burning spots or
cracks in the
workpiece.
Improper type of grinding wheel.
Try wheels with a softer bond or
coarser grit.
Improper feed rate.
Slow down the rate at which the
workpiece is fed into the wheel.
Coolant required.
Add coolant.
Wheel dulls
quickly or grit
falls off.
Feed rate is too aggressive.
Decrease feed rate of workpiece into
grinding wheel.
Wheel is soft.
Select a grinding wheel with a harder
bond of material.
Bad wheel dressing.
Dress the wheel.
Defective wheel bonding.
DO NOT USE.
Wheel clogs and
workpiece shows
burn marks.
Wheel is too hard.
Select a grinding wheel with a softer
bond of material.
Feed rate is too slow.
Increase the feed rate of the workpiece
into the grinding wheel.
Bad wheel dressing.
Dress the wheel.
Coolant required.
Add coolant.
Содержание 61457
Страница 18: ...Page 18 of 21 Parts Diagram...
