Ironton 45994, Руководство пользователя

Страница: 14 / 20

Page of 20 14
2. FITTING BLADES
CAUTION:
The Twin Cutter is not designed for use with abrasive wheels.
3. Screw in the blade bolt but do not tighten.
4. Turn the blades so that the holes are aligned.
5. Place the lock pin through the holes to hold the
blades. Tighten the lock nut.
6. Turn the blades by hand to check that they
easily turn in opposite directions.
1. Place Blade A onto the blade flange with the
pins of the flange in the corresponding holes in the
blade.
2. Place Blade B over the shaft.