Page 3 of 8
3B. Apply masking tape to right hand windscreen pillar.
4B. Attach snorkel securing bracket from inside of
mud guard using pop rivets supplied as shown.
5A&B.
Stick snorkel gasket to back of snorkel body
as shown, using lock tight screw studs into
captive nuts on back of snorkel body.
NOTE: Long 40mm stud goes in hole as shown.
6A&B.
Attach upper mounting bracket loosely to snorkel.
2B. Remove right hand front mud guard liner, mud
flap, air box, air entry duct to air box, mud guard
stuffer, front mud guard grill and side marker
indicator.
PX
PX and PX Mk II
