Page 2 of 8
1. Before installation check snorkel application is compatible with your vehicle
These instructions are for PX XL or PX XL Mk II only.
Refer to headings throughout these instructions for directions specific to your vehicle.
2A. Remove right hand front mud guard liner, mud
flap, air box, air entry duct to air box, mud guard
stuffer, front mud guard grill and side marker
indicator.
PX Mk II
3A. Apply masking tape around opening on mudguard
and to screen pillar.
4A. Locate paper drilling template on page 8 of
these fitting instructions and cut out shaded
areas. Place template in position on right hand
mudguard, aligning with opening and guard edge,
then mark holes.
5A. Drill 16mm mounting holes using a step drill.
De-burr and rust-proof exposed metal.
