TOOLS AND MATERIALS REQUIRED FOR ASSEMBLY
(Not Included)
1. 2 Adjustable Wrenches 10. Concrete-1/2 yard or 14-16
2. Socket Set Bags, (80 lb. bags)
3. 9/16" Wrench 11. Phillips Head Screwdriver
4. 3/4" Wrench
5. 15/16" Wrench 13. Carpenter's Level
6. ½" Wrench 14. Water Supply
7. Hammer or Mallet
8. Tape Measure
9. Shovel
**
A MINIMUM OF SIX ADULTS IS
REQUIRED TO LIFT UNIT INTO PLACE**
STOP!
STOP!
BEFORE YOU START
A. Identify and inventory all parts using the checklist boxes in the parts list. Be sure to
keep the hardware bags and their contents separate. If any parts are missing call
our Customer Service Department (
).
620-662-2233
B. Test fit all Bolts by inserting them into the respective hole. If necessary, carefully
scrape away any excess powder coating buildup from inside the holes. Do not
scrape away all of the powder coating. Bare metal may rust.
!
!
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE
AND WILL VOID THE WARRANTY. The owner must ensure that all players know and follow these rules to safely operate the
system. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk
of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, or operated
properly.
●
●
If using a ladder during assembly, use extreme caution. Follow all warnings and cautions on the ladder carefully.
6
people are required to lift the unit into place.
Before digging, contact the appropriate agency to locate underground
●
power cables, gas, and water lines. Do not install the system within 20 feet of overhead power lines.
Climate, corrosion,
●
or misuse could result in system failure.
If technical assistance is required, contact the manufacturer.
Minimum
●
●
operational height is 7'6 to the Rim. Most injuries are caused by misuse and /or failure to follow instructions.
”
Use caution when using the system.
2
12. A minimum of 2 Ladders
