7.2. Connecting a Matrix-II K.
7.3. Working with a DS1996L-compliant Key
The Figure shows how to connect a Matrix-II K
controller to this adapter. Connection is possible at
any time.
To work with a DS1996L-compliant key, connect a
contactor as shown on this Figure. Information
interchange with the key requires the BaseZ-5R
software.
Matrix
II
K
5
5
8. CONNECTING A READER
The adapter allows connecting a reader and using it to feed card serial numbers into a PC.
Connection is done to the terminals. Terminals with the same name are internally joined within the
adapter and allow connection to any of them.
The reader can be powered by the adapter if its maximum consumption current does not exceed
150 mA. The adapter also automatically detects reader connection protocol iButton™ or Wiegand
(whose bit width is auto-detected, too).
Information about successfully acquired codes is transmitted into a COM port in a specified text-
based format, which can be set by Format.exe utility found in the drivers distribution archive.
A connected reader does not preclude normal Socket 1 operation. This means it is possible to make
any exotic card type reader into desktop-based.
page 5
Z-2 BASE
www.ironlogic.me
