background image

(Revised 7

26

/

/2017) 

 

Iron Edison Battery Company 

Lithium Iron Phosphate Battery  

LIMITED WARRANTY 

Iron Edison Battery Company warrants only to the original purchaser that any battery product which becomes unserviceable (not merely discharged) 
due to defect in material and/or workmanship within the free replacement period stated below will be replaced without charge. Any battery product 
which becomes unserviceable (not merely discharged) due to defect in material and/or workmanship within the pro-rated period stated below will 
receive a credit or refund as stated below. This warranty starts from the date delivered, applies to the original purchaser of the battery and is non-
transferable. Purchaser is responsible for all shipping and testing costs for returned batteries, including any additional duties & taxes. If the battery is 
deemed to be defective under the terms stated below, replacement product of materials shall be shipped free of charge and testing costs shall be 
refunded. Iron Edison shall make all reasonable efforts to accomplish testing in a timely and efficient manner. 

Lithium Iron Phosphate Batteries cannot be discharged more than 80% of nominal capacity, or below 3.15 volts per cell. Battery shall not be charged 
or discharged at a rate greater than C/2 (50% of the battery’s amperage rating). Charge controllers, inverters & generators must be configured using 
Iron Edison provided settings to be compliant with these requirements. This warranty does not include use in electric vehicle drive train, or other 
motive applications. 

The battery owner will read warning labels on the battery and exercise due care in working on or around it.  The battery is intended to be used by 
persons with training or experience with batteries. This warranty replaces all previous warranties, and may be updated in the future. 

WARRANTY EXCLUSIONS 

Iron Edison’s exclusive liability for breach of any warranty on the battery shall be to repair or replace the battery or repay the pro-rated portion of the 
actual purchase price paid for the defective product within the warranty period in accordance with the terms of this limited warranty. In no event shall 
Iron Edison Battery Company or any of its affiliates be liable in contract, tort or otherwise for any loss, claim or damages of any other kind, whether 
direct, incidental, consequential, exemplary, special, punitive, remote or otherwise, including any lost profits, lost revenue or incentives, loss of 
equipment, cost of purchased power, cost of substitute product, facilities or services, claims of customers of owner, or removal, shipping, 
transportation or installation expenses. 

The battery must be used in the application for which it was designed, and placed into service within 180 days of delivery. Warranty does not cover 
abuse or neglect, corroded hardware, improper maintenance, improper installation, cosmetic shortcomings which do not impact use or performance, 
breakage, force majeure (ie: fire, flood, earthquake, storm damage, overvoltage, lightning strikes, etc.), damage in transportation, exposure to fire, 
water, snow, moisture or liquid ingress, exposure to excessive heat (above 45C)or extreme cold (below -20C), charging at low temperatures (below 0C), 
the addition of any chemical or solution, damage from other electrical equipment or if the manufacturing codes have been destroyed or tampered with. 
Any changes made to the battery’s hardware or software without prior approval shall immediately void this warranty. This warranty excludes any 
changes in appearance of the product that do not impact its performance, replacement of fuses, and replacement or resetting of circuit breakers.  

 

 

Содержание 4LiFe IE48V100
























Отзывы: