9
Copyright 2019 Iron Bow Technologies
Attach the MedView/MEDVIEW-BRKT100-A01 bracket assembly to the Monitor
1.
Place the monitor face down on a table being sure to protect the front face from scratches or
damage.
2.
Position the (4) spacers over the VESA mount holes in the monitor. If the rear of the monitor is flat,
and nothing prevents the bracket from mounting flat to the surface, the spacers are not necessary.
3.
Position the MedView and bracket on top of the spacers (on the monitor) so the VESA hole patterns
line up.
4.
Position the Angled half of the ML20B bracket as shown, aligned with the VESA hole pattern.
5.
Secure the bracket to the monitor using the screws provided.
a.
Use the (4) M4x25 Phillips pan head screws to secure the bracket to the monitor.
b.
If no spacers are used, use the (4) M4x18 Phillips pan head screws to secure the bracket to
the monitor.
Figure 4 - Assemble MedView to Monitor
